Charge your Solawave device fully (2 hours) before your first use, or until the LED indicator on the device stays on. If the LED indicator remains on when you first connect the charging cable, then your device is already fully charged and you may begin using. If the light is blinking please charge until the light remains steady.

To charge the device:

1. Attach the charger to the device. 
2. Insert the USB-A side of the cable into a 5V USB power supply (wall outlet or computer). The LED indicator on the device will start to blink to indicate charging. 
3. When the device is fully charged, the LED indicator will stay on. 
4. Disconnect the charging cable from the device.

Charging Tips

• Only use a 5V adapter or USB port (most computers have one). 
• Avoid fast chargers as they can damage the battery.
• The lifetime of the lithium battery can be maximized by allowing it to fully charge and discharge during regular use. Allow the device to deplete before charging again. Do not charge after every session.
• Note: Always unplug the device before use, the device will not work while being charged.